Enmet RECON-4 Manual de usuario descargar pdf (Pagina 16)

d. Select and open the calibration data file provided by the manufacturer.

e. The calibration data will then be input into the RECON-4.

f. Once the new calibration data is input into the RECON-4, the instrument should work properly with the

new sensor.

(See Note for Sections 3.9) 3.9.2 Output Calibration File:

Procedure to output calibration data file:

The user can also output the calibration data file of a sensor from the RECON-4 for saving or changing the

sensor to another unit. For example, if the user wants to change the Oxygen sensor of one RECON-4 to

another, HE / SHE can output the calibration data of the Oxygen sensor first. Then install the Oxygen

sensor to another RECON-4, and THEN input the output calibration data file to the new RECON-4. In this

way, the Oxygen sensor will work properly on another unit. CAUTION: The new sensor should always be

tested with gas to verify proper calibration.

a. Select “Operation” and then Click on “Output Calibration File” in the drop down menu.

b. Check the box of the sensor whose profile / calibration data file you want transferred to an Output file,

and click OK.

1 2 ... 11 12 13 14 15 16 17

Sin comentarios

Enmet RECON-4 Manual de usuario Pagina 16