Enmet OMNI-4000 Manual de usuario descargar pdf (Pagina 38)

ENMET Corporation OMNI-4000 S/N 6705 and above

Review of Data

This concerns the OMNI-4000 whether connected to a serial printer or the serial port of a compatible personal

computer.

During the printing, the OMNI-4000 automatically chooses one of two displays:

• If the data storage time is less than 15 minutes, the data is presented in the form of charts, as in Figure 2-24A.

• If the data storage time is at least 16 minutes, the data is presented in the form of graphs, as in Figure 2-24B.

Figure 2-24A: Data Readout, Chart

Figure 2-24B: Data Readout, Graph

Optional Clearing of the Memory

At the end of the printing procedure, the display shows:

The operator has the choice of:

• Canceling all the data still stored (clear the memory) and just reviewed, prior to putting the OMNI-4000 back

into operation. This choice is implemented by pressing the ENTER switch.

• Saving the data and putting the OMNI-4000 back into operation. This choice is implemented by pressing the

BACKLIGHT switch.

Return to Normal Mode

This is automatic after pressing a switch, per the above procedure. Remove the printer cable.

Accept: ENTER

Cancel: ¨

To clear

Memory

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Sin comentarios

Enmet OMNI-4000 Manual de usuario Pagina 38